Onze excuses, wij kunnen u niet aanmelden.
Controleer uw e-mailadres en wachtwoord.
Uw laatste winkelwagen is nog beschikbaar
Het winkelmandje van uw laatste bezoek aan Black Box is nog steeds beschikbaar.
Wilt u de producten in deze winkelwagen bekijken?
De Black Box website maakt gebruik van cookies. Door de Black Box website te blijven gebruiken of door op de instemmingsknop rechts te klikken, gaat u akkoord met het gebruik van cookies op deze website.
Meer informatie.
Digital HDMI and DVI formats provide sharp, crystal-clear image quality. However, problems can occur. Here are the five most common:
Problem 1: Black screen (no picture at all).
Possible causes:
Bad cable or cable that’s too long, causing either the video signals or EDID/HDCP control signals not to be transmitted properly. Make sure that you use quality, high-speed HDMI® cables—they don’t even have to be expensive ones—or try an HDMI extender.
HDCP is unsupported. Does the display support HDCP? DVI displays usually don’t.
Problem 2: “Sparkles” in the picture.
Usually caused by: HDMI cable that’s too long or of inferior grade. The solution is to use a video extender, and/or buy quality HDMI cables from a reputable supplier.
Problem 3: RGB color tint.
Usually caused by: A color encoding issue, a common problem when using a DVI display with an HDMI source. If you’re using a splitter or an extender between your source and the link, make sure it handles EDID. If possible, force the source (for instance, a Blu-ray player) to output HDMI video with RGB color encoding instead of Component (YPbCr) video encoding.
Problem 4: White noise or “snow” on-screen.
Usually caused by: An HDCP issue. This is actually what the encrypted video looks like. It happens when your display (or any active component, like an extender, used in the transmission) doesn’t support HDCP. The display, in turn, isn’t able to decrypt the video stream. Be sure to use equipment that supports HDCP.
Problem 5: Flickering or unstable image.
Can be caused by: Electromagnetic or radio frequency interference, bad cable, or cable that’s too long. These all can cause issues with HDCP or the signal, resulting in flickering or the video randomly disappearing then reappearing after a second. The solution: Use certified high-speed HDMI cables instead of standard HDMI cables, or if you need to go long distances, try an extender. If you’re already using an extender, try changing to shielded CAT6 solid-core bulk cable.
Winkelwagen
Inloggen
Neem contact op
Problem 1: Black screen (no picture at all).
Problem 2: “Sparkles” in the picture.
Problem 3: RGB color tint.
Problem 4: White noise or “snow” on-screen.
Problem 5: Flickering or unstable image.
