...Possible causes: • Bad cable or cable that’s too long, causing either the video signals or EDID/HDCP control signals not to be transmitted properly. Make sure that you use quality, high-speed HDMI® cables—they don’t even have to be expensive ones—o...

IP-Based A/V Distribution • IP-Based A/V Distribution • IP-based distribution technologies use transmitters and receivers to extend signals over a TCP/IP network (a LAN or even a WAN, for instance). Oftentimes, they’re called IP streamers when...

...etc. S/PDIF is based on the professional AES3 interconnect standard. • S/PDIF signals are carried over two types of cables. The first is a 75-ohm coaxial cable with orange RCA connectors. The second is a fiber cable with TOSLINK connectors.

...means the interconnect cable requires less board space. • Thinner cables • Serial ATA also uses thinner cables (no more than 6.3mm wide) that are available in longer lengths (up to 1 metre) as well as an improved connector design to reduce crosstal...

...Ethernet, power over cable, and various control signals through a single LAN cable. This is referred to as 5Play™, a feature set that sets HDBaseT technology above the current standard. • Video • HDBaseT delivers full HD/3D and 2K/4K uncompressed...

Common display configurations • Common display configurations • Individual video screens • The most common digital signage application is individual video screens displaying information. Often multiple screens in various locations are networke...

...through the data cable. • Excess voltage • If the voltage potential is large enough, your equipment won’t be able to handle the excess voltage and one of your ports will be damaged. • You can’t test for ground loops. You don’t know you have o...

...to fibre and run cables across an extra-long distance-up to 50 kilometres or more! • Have an Ethernet switch with RJ-45 ports? No problem! Use a converter to attach legacy AUI and BNC or new fibre segments. • What are Media Converters? • Medi...